Aspire Breeze 2 AIO Kit

Adjusting the airflow is simple, just pull off the mouthpiece and turn the knurled airflow adjustment ring to your liking

Aspire has now made available spare/replacement pods for the Aspire Breeze 2. What could be more convenient than having a spare pod around to quickly and easily switch flavors at any time? Just squeeze the side buttons, out pops one pod, then push in a different pod. Each replacement/spare pod comes with a pre-installed 0.6 ohm coil and its own top cap, so no leaks in your pocket or purse. Switch flavors with ease with a spare Breeze 2 pod.

Coil installation is easy too, just pull and remove the drip tip, unscrew and pull out the airflow component. Then detach the coil from the airflow control ring and replace it with a new one. Screw the airflow component back to the pod system and replace the drip tip section.
Note: when inserting a new coil and filling the pod, always let the device stand for 3 minutes to allow the coil to become saturated. This will help avoid dry hits and damage to the coil.

Squeeze the pod release buttons on each side of the device to release and remove the pod system. Invert the pod and lift the silicon seal, place the filling bottle/dropper into the pod filling hole squeeze the filling bottle/dropper bulb to add your preferred e-liquid into the pod system. Replace the silicone seal firmly and re-insert the pod into the power unit.

Charge via the Micro USB port. Maximum charge current can reach up to 800mA. When the USB cable is attached the Breeze 2 indicator light will flash blue and orange three times.

Standard Version
1* Breeze 2 device / 2* Coils (1*1.0Ω/1*0.6Ω) / 4* Extra O rings / 1* Silicone seal / 1* Micro USB Cable / 1* Warranty Card / 1* User Manual

TPD Version
1* Breeze 2 device / 2* Coils (1*1.0Ω/1*0.6Ω) / 4* Extra O rings / 1* Micro USB Cable / 1* Warranty Card / 1* User Manual