Aspire Tigon Kit 1800mAh - stainless steel
An all new ‘stick’ style device from Aspire. Introducing the Tigon kit, an easy to use ‘child safe’ compact device from ASPIRE. It comes in four stylish color finishes, Stainless Steel, Blue, the ever-popular Rainbow, and Black. It can be used as an MTL (mouth to lung) or a restricted DTL (direct to lung) vape. It comes with a long-lasting built-in battery, works in ‘By-Pass’ mode and you can be sure of a great performing everyday compact device for purse or pocket. It is the first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.
Kits Contents
1 x Tigon Kit (2.0ml)
1 x Glass tube
1 x Extra drip tip
2 x Coils (1 x 0.4Ω preinstalled & 1 x 1.2Ω)
10 x O-rings
1 x Warranty Card
1 x Screw adjustment tool
1 x User Manual
Kit Dimensions and specifications:
Width: 22.3 mm
Height: 123 mm
Battery capacity: 1800 mAh
Tank capacity: 2 ml
Aspire Tigon Drip tips
The Tigon kit comes supplied with a choice of MTL, longer style, drip tip and a slightly wider bore ‘stubby’ style drip tip more suited to restricted DTL hits.
Tigon coils
Aspire has included more flexibility in the Tigon kit by including two types of push fit coils.
A 0.4ohm DTL style coil designed to run from 23-28 watts and a 1.2ohm coil designed to run at 10-12 watts more suited to MTL style vaping. Both coils are made from high grade nichrome wire, with great wicking properties for a flavorful vape.
The push fit coils help reduce mess when changing and are much easier to remove and replace.
The 1.2ohm coil would be suitable for nic salt type e-liquid but can equally be used with normal e-liquid.
Aspire Tigon Filling - Filling couldn’t be simpler in a child proof/leak proof tank of this type.
First pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leak proof seal of the fill port. The silicon fill port on the tank has a self-sealing valve into which you can insert your chosen filling bottle nozzle to fill the tank.
Closing the tank is the opposite, slide the top cap back into place covering the silicon seal and push down.
Remember, when using a new coil, to let the cotton of the coil saturate in the e-liquid for 5 minutes or so before you start to vape. This will ensure that you don’t get dry hits or damage the coil.
Coil Installation
On the Aspire Tigon tank, coil replacement is just a case of unscrewing the base hardware, pulling out the old coil and replacing with a new one.
Then screwing the base hardware back on again. Note that the Tigon tank can still hold e-liquid when changing the coil, this is because the wicking holes in the tank are covered by a spring loaded sleeve that will slide shut sealing the holes when the coil is removed.
Remember, before using a coil for the first time to let it stand for 5 minutes after filling with e-liquid to saturate the coil and avoid dry hit and damage to the coil.
Glass tube removal and Installation - when removing and/or replacing the glass tube of the tank, you need to follow these steps.
First, unscrew and remove the base hardware and pull out the coil.
Then invert the tank and using the special key provided, unlock the top hardware by placing it in the slot of the screw holding the top hardware (see diagram).
Next, remove the glass tube. Replace the glass tube and follow the steps in reverse, (it is easier to place the screw onto the key first to locate it into the top hardware), secure the screw, insert the coil and replace the base hardware.
Remember, before using a coil for the first time to let it stand for 5 minutes after filling with e-liquid to saturate the coil and avoid dry hit and damage to the coil.
Ingenious self sealing coil housing
The first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.
Aspire Tigon Airflow
The Tigon tank has Aspire’s new dual function airflow settings. Turning it initially will reveal 5 smaller holes than can be adjusted from 5 open to 4 then 3,2,1. This is for the MTL type vaping with 1 small hole being the tightest draw.
Rotating the airflow adjustment further will reveal a ‘slot’ style airflow adjustment, again this can be adjusted from wide open to almost closed for a restrictive DTL type hit.
Charging
Charging is carried out using the supplied USB cable. Attach the USB cable to the body of the Tigon kit and connect to a suitable power supply when charging the indicator light will indicate the charge status of the device, 3.5V or less the light is red, 3.5-3.8V will be indicated by a blue light, when the charge level is above 3.8V, the light will be pink. When fully charges the light will flash 20 times and switch off to indicate fully charged. The maximum charge current can reach up to 2A. Safety Features
Safety Features
An all new ‘stick’ style device from Aspire. Introducing the Tigon kit, an easy to use ‘child safe’ compact device from ASPIRE. It comes in four stylish color finishes, Stainless Steel, Blue, the ever-popular Rainbow, and Black. It can be used as an MTL (mouth to lung) or a restricted DTL (direct to lung) vape. It comes with a long-lasting built-in battery, works in ‘By-Pass’ mode and you can be sure of a great performing everyday compact device for purse or pocket. It is the first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.
